Product Information

Progressive scan camera

FC11000GE

GigE Vision-compliant, 11 megapixels, 5 frame/sec
Progressive Scan Camera

GigE
FC11000GE FC Tool Download
Overview
  • High-resolution progressive scan camera incorporated with 11-megapixel, diagonal 43mm-size CCD operating at 5fps frame rate (in DUAL mode).
  • Video signal is output complying with Gigabit Ethernet in progressive scanning (non-interlaced scanning) format.
  • GigE Vision compliant.
  • Digital image signal can be output in 12/10/8-bit format (switchable).
  • The internal set values of the camera are externally controlled with serial communication via Ethernet.
  • Asynchronous electronic shutter function provides still full frame images at any timing.
Features
  • Capable of image transmission over 100m without repeater.
  • Capable of image capturing into computer without image capture board.
  • Equipped with IP engine for high speed image transmission. Jumbo frame packet - compatible.
  • Highly-sensitive and wide dynamic range camera with 35mm film size (Diagonal 43mm) CCD.
  • The current setting status of the camera can be displayed over the captured image using superimposing function enabling to display text information by OSD.
  • When the external trigger signal is input, the image is reset at a random timing (Asynchronous timing) and the electronic shutter image can be obtained at a given point in time. (Asynchronous shutter mode)
  • DUAL/SINGLE output mode switchable. It is equipped with a correction function that automatically reduces the level difference between right image and left image when in DUAL mode.
  • The trigger signal for strobe light is output in synchronization with the timing to release the shutter. The camera is designed so that the strobe signal can be output even in the continuous shutter mode, and this contributes to the power saving for LED lighting and others as well as the reduction of smear.
  • The asynchronous shutter is applicable both in the preset shutter mode and the pulse width control mode.
  • The ID information set by the user for each camera can be saved and read out whenever necessary (via serial communication link).
  • The monitoring function for measuring the internal temperature of the camera is incorporated.
Applications
  • Data input device for high-resolution electronics shutter image processor
  • Appearance inspection device for LSI
  • Microscope usage
  • Inspection device for LC or Plasma panel
  • Input device for image processing unit connecting to computer through networks.
Spectral sensitivity

Note : The characteristics of lens, luminous source or others are left out of consideration.

Specifications
  DUAL output SINGLE output
Image sensor Progressive scanning, Interline transfer CCD
Diagonal 43mm size
Unit cell size: 9.0µm(H) × 9.0µm(V)
Effective Pixels 4008(H) × 2672(V) Square grid pattern
Read Out Scanning fH=14.1 kHz fH=7.5 kHz
fV=5.1 Hz fV=2.7 Hz
fCLK=32.5 MHz
Min. subject illuminance 1.0Lx F1.4
S / N Ratio Approx. 50dB
Video output Progressive scanning:
5.1 frame/sec. 2.7 frame/sec.
Digital output: 10bit/8bit/12bit GigE Vision compliant
32.5MHz × 2tap output 32.5MHz × 1tap output
External Sync Input Internal Sync only
Electronic shutter 1/2000sec. ～1/5sec. (No shutter) ～1/0.51sec. 1/1200sec. ～1/2.7sec. (No shutter) ～1/0.27sec.
Asynchronous Shutter Preset fixed shutter/Pulse width control
Scanning Mode Normal (All pixels read out) / Double speed
Lens Mount F mount (flange back fixed)
External Control Serial interface via Ethernet
Special Function Function of imposing setting information over output image
Function of monitoring internal temperature of camera
Function of storing camera ID information
Power Supply DC12V±10%、500ｍA (Typical)
Outside Dimension 64(W) × 64(H) × 94(L)mm (connector excluded)
Weight Approx. 500g

Toward top of this page