Product Information

Progressive scan camera

FC2050ACL

Small and Lightweght, 2.01 megapixels, 15.3 frame/sec
Progressive Scan Camera

FC2050ACL
Overview
  • High-resolution progressive scan camera with 2.01 million pixel CCD capable of 15.3 fps readout.
  • Small and lightweight camera with the size of 28(W) × 28(H) × 46.3(L).
  • A variety of readout modes such as 1/2 partial scan, 1/4 partial scan and variable partial scan are equipped.
  • 10 bit digital image signal output complying with Camera Link Std. can be obtained.
  • Video signal is output in progressive scanning (non-interlaced scanning) format, complying with Camera Link (Base configuration)
  • Asynchronous electronic shutter function provides still full frame images at any timing (Asynchronous shutter mode).
  • The internal set values of the camera are externally controlled with serial communication via Camera Link.
Features
  • Asynchronous electronic shutter function provides still full frame images at any timing just by inputting an external trigger signal.
  • Preset trigger input and pulse width trigger input as asynchronous shutter trigger input are available.
  • Electric shutter release timing is output as a stroboscopic emission trigger signal. (3.3V Logic level)
    * Refer to the specification document for more information about timing.
Applications
  • Data input device for high-resolution lectronic shutter image processor
  • Data input device for appearance inspection device for LSI
  • Data input device for microscope
  • Data input device for ITS such as car umber reading
  • Data input device for image processor connected to computer
Spectral sensitivity
Specifications
Image sensor Progressive scanning, interline transfer CCD
1/1.8 inch size
Effective Pixels 1628(H) × 1236(V) Square grid pattern
Read Out Scanning Horizontal Scanning fH=19.176 kHz
Vertical Scanning fV=15.3164 Hz
Pixel Clock fCLK=36.8181 MHz
Min. subject illuminance 2Lx F1.4
S / N Ratio ≤10digit (GAIN 0dB)
Sync System Internal sync-only
Video output Digital output / CameraLink-compliant (Base Configuration)
10bit resolution (36.8181MHz × 1 × 10bit output)
Electronic shutter 1/2 (no shutter) to 1/100,000 sec (Variable at every H and CLK)
Asynchronous Shutter Pulse width control / Preset shutter
Scanning Mode Normal scan (all pixels) / 1/2 Partial scan / 1/4 Partial scan / Variable scan
Trigger Input via・CC1
(LVDS format)
Gamma Characteristic γ = 1 Fixed
Serial Communication UART built-in asynchronous communication method
9600bps or 38400bps
Lens Mount C mount (flange back fixed)
Power Supply DC12V±10%, 160mA
Consumption: less than 1.8W
Outside Dimension 28(W) × 28(H) × 46.3(L)mm (excluding connector and tripod attachment)
Weight Approx. 43g (excluding tripod attachment)

Toward top of this page