Product Information

Progressive scan camera

FC820 (15 frame/sec)
FC320 (30 frame/sec)

0.80/0.33 megapixels
Progressive Scan Camera

FC320 FC820
Overview
  • Progressive scan camera with 0.8/0.33 megapixel CCD capable of 15/30 fps readout.
  • The 10-bit digital-parallel video signal is output in progressive scanning (non-interlaced scanning) format.
  • When the external trigger signal is input, the image is reset at a random timing (Asynchronous timing) and the electronic shutter image can be obtained at a given point in time. (Asynchronous shutter mode)
  • The smear in high speed shutter mode is significantly reduced compared to the conventional camera, as TAKEX FC series camera adopts newly-designed interline transfer CCD.
  • Small size and lower price have been realized by specializing in digital output and internal sync-only specifications.
Features
  • Vertical resolution does not degrade even in electronic shutter operation as all pixels are read out independently by progressive scanning.
  • Digital video signal is output in 10 bit format via RS-422 interface.(or optional RS-644 interface)
  • The exposure time in continuous shutter mode and asynchronous shutter mode is variable in eight steps starting from 1/10000sec(fastest shutter speed).
    Preset fixed mode, pulse width control mode and asynchronous shutter mode are available.
  • In long exposure mode, the exposure time can be set by the frame time starting from two frame time.
  • The trigger signal for strobe light is output in synchronization with the timing to release the shutter.
  • Double-speed scan mode is available in the continuous shutter mode.(FC820)
  • Three operation setting parameters can be stored in EEPROM.
  • High sensitivity and low smear
Applications
  • Image input device for high-resolution image processor
  • High density bar-code reader
  • Image input device for ITS such as car umber reading
  • Inspection device for LC or Plasma panel
  • Microscope usage
  • Input device for image processing unit connected to computer
Spectral sensitivity
Specifications
  FC820 FC320
Image Sensor Progressive scanning, interline transfer CCD
1/2 inch size 1/3 inch size
1034(H) × 779(V)
0.8 megapixels		 659(H) × 494(V)
0.33 megapixels
Read Out Scanning fH = 12.0KHz
fV = 15 Hz
fCLK = 14.318 MHz		 fH = 15.7KHz
fV = 30 Hz
fCLK = 12.27 MHz
Sensitivity 100Lx F11
(shutter 1/15sec)		 100Lx F11
(shutter 1/30sec)
Min. Subject Illuminance 1Lx at F1.4
S/N Ratio 50dB or more
Video Output Digital out : 10bits, RS-422
differential output 100 Ω load
Gamma γ = 1
Electronic Shutter 1/10000-1/15sec-Long exposure 1/10000-1/30sec-Long exposure
Lens Mount C mount
Power Supply DC 12V ± 10%
450mA Max. 380mA Max.
Outside Dimension 46 (W) × 49 (H) × 120 (L) mm (excluding connectors)
Weight Approx. 300 g

Toward top of this page